paloaltonetworks.panos.panos_loopback_interface module – Manage network loopback interfaces

Note

This module is part of the paloaltonetworks.panos collection (version 2.21.2).

To install it, use: ansible-galaxy collection install paloaltonetworks.panos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: paloaltonetworks.panos.panos_loopback_interface.

New in paloaltonetworks.panos 1.0.0

Synopsis

• Manage loopback interfaces on PanOS

Requirements

The below requirements are needed on the host that executes this module.

• pan-python can be obtained from PyPi https://pypi.python.org/pypi/pan-python

• pandevice can be obtained from PyPi https://pypi.python.org/pypi/pandevice

Parameters

Parameter	Comments
adjust_tcp_mss boolean	Adjust TCP MSS. Choices: :ansible-option-choices-entry:`false` :ansible-option-choices-entry:`true`
api_key string	Deprecated Use provider to specify PAN-OS connectivity instead. The API key to use instead of generating it using username / password.
comment string	Interface comment.
commit boolean	Deprecated Please use paloaltonetworks.panos.panos_commit_firewall, paloaltonetworks.panos.panos_commit_panorama, paloaltonetworks.panos.panos_commit_push instead. Commit changes after creating object. If ip_address is a Panorama device, and device_group or template are also set, perform a commit to Panorama and a commit-all to the device group/template. Choices: :ansible-option-choices-entry:`false` :ansible-option-choices-entry:`true`
gathered_filter string	When state=gathered. An advanced filtering option to filter results returned from PAN-OS. Refer to the guide discussing gathered_filter for more information.
if_name string	Name of the interface to configure.
ip list / elements=string	List of static IP addresses.
ip_address string	Deprecated Use provider to specify PAN-OS connectivity instead. The IP address or hostname of the PAN-OS device being configured.
ipv4_mss_adjust integer	(7.1+) TCP MSS adjustment for IPv4.
ipv6_enabled boolean	Enable IPv6. Choices: :ansible-option-choices-entry:`false` :ansible-option-choices-entry:`true`
ipv6_mss_adjust integer	(7.1+) TCP MSS adjustment for IPv6.
management_profile string	Interface management profile name.
mtu integer	MTU for loopback interface.
netflow_profile string	Netflow profile for loopback interface.
password string	Deprecated Use provider to specify PAN-OS connectivity instead. The password to use for authentication. This is ignored if api_key is specified.
port integer	Deprecated Use provider to specify PAN-OS connectivity instead. The port number to connect to the PAN-OS device on. Default: :ansible-option-default:`443`
provider dictionary added in paloaltonetworks.panos 1.0.0	A dict object containing connection details.
api_key string	The API key to use instead of generating it using username / password.
ip_address string	The IP address or hostname of the PAN-OS device being configured.
password string	The password to use for authentication. This is ignored if api_key is specified.
port integer	The port number to connect to the PAN-OS device on. Default: :ansible-option-default:`443`
serial_number string	The serial number of a firewall to use for targeted commands. If ip_address is not a Panorama PAN-OS device, then this param is ignored.
username string	The username to use for authentication. This is ignored if api_key is specified. Default: :ansible-option-default:`"admin"`
state string	The state. Choices: :ansible-option-choices-entry-default:`"present"` ← (default) :ansible-option-choices-entry:`"absent"` :ansible-option-choices-entry:`"replaced"` :ansible-option-choices-entry:`"merged"` :ansible-option-choices-entry:`"deleted"` :ansible-option-choices-entry:`"gathered"`
template string	(Panorama only) The template this operation should target. This param is required if the PAN-OS device is Panorama.
username string	Deprecated Use provider to specify PAN-OS connectivity instead. The username to use for authentication. This is ignored if api_key is specified. Default: :ansible-option-default:`"admin"`
vr_name string	Name of the virtual router; it must already exist. Default: :ansible-option-default:`"default"`
vsys string	The vsys this object should be imported into. Objects that are imported include interfaces, virtual routers, virtual wires, and VLANs. Interfaces are typically imported into vsys1 if no vsys is specified.
vsys_dg string	Deprecated Use vsys to specify the vsys instead. Name of the vsys (if firewall) or device group (if panorama) to put this object.
zone_name string	Name of the zone for the interface. If the zone does not exist it is created but if the zone exists and it is not of the correct mode the operation will fail.

Notes

Note

• Checkmode is supported.

• Panorama is supported.

• PAN-OS connectivity should be specified using provider or the classic PAN-OS connectivity params (ip_address, username, password, api_key, and port). If both are present, then the classic params are ignored.

Examples

# Delete loopback.1
- name: delete loopback.1
  paloaltonetworks.panos.panos_loopback_interface:
    provider: '{{ provider }}'
    if_name: "loopback.1"
    state: 'absent'

# Update/create loopback comment.
- name: update loopback.1 comment
  paloaltonetworks.panos.panos_loopback_interface:
    provider: '{{ provider }}'
    if_name: "loopback.1"
    ip: ["10.1.1.1/32"]
    comment: "Loopback iterface"

Authors

• Geraint Jones (@nexus_moneky_nz)

• Garfield Lee Freeman (@shinmog)

Collection links

Issue Tracker Homepage Repository (Sources)